We are one of the market's largest providers of statutory inspections of lifting equipment, cranes and related equipment, and of course we ensure that your documentation when testing your equipment is correct.
Both cranes and lifting gear are marked with our unique tag. It is printed directly from our service system EasyCert and contains the date of the last inspection, the date of the next inspection, our unique ID and, if you wish, can also contain your unique ID number. The back also contains a QR code that easily gives access to all the history of the equipment at hand.
There are products where our label is not attached. These products will be supplied with strips with the unique identification number.
When you choose us as a supplier, you get:
1
Inspection of cranes and lifting equipment according to fixed procedures and documentation on that we always follow them.
2
Individual marking of gear with full traceability and visible color code.
3
Online immediately - your certificate is immediately available after the inspection.
4
Registration of all your equipment in EasyCert, it gives you the full overview of all your gear.
5
Individual certificates on all your gear. We ensure that you always comply with applicable legislation.
6
The individual certificates contain a description of what has been checked, done and the reasons for any non-approvals and documentation for all replacements.
Get an overview of all your lifting equipment
EasyCert is your online portal, where you can get a complete overview of all your lifting equipment via your own username/login.
Each individual lifting tool/equipment is registered in connection with the inspection carried out and has its own individual "master card", with all relevant information such as type, model, WLL, ID no. supplier, etc.
Your certificates 24-7-365
When we have inspected your equipment, everything will be marked with individual ID numbers. Regardless of when, you will via EasyCert be able to enter the equipment's ID number and find the product's data and associated certificate or documentation.
EasyCert is a free service offered to all Fyns Kran Udstyr customers. What was previously reserved for a few selected customers is available to everyone - we do not consider that the safety of "smaller" customers is less important.
Warning lights
Via simple color coding, you will be able to quickly form an overview of your equipment, including what is due for an inspection and also what needs to be inspected within the next 3 months.
More than a multi search tool
EasyCert is a "multi-search tool" that provides countless options for direct searches for specific tools / certificates, or possibilities to sort by either types, makes, lifting capacity, etc. The system is simply built and this means that you don't have to have physical papers lying around in folders, in the event that the Labor Inspection Authority or other authorities come to visit.
You also have can also have your utilization of the platform. The fields "Department" or "Location" are intended for our customers' own wishes. For example, "Production dept." – "Hall 1". This will delimit and show exactly the equipment located at the respective locations, which you as a user can edit via your own login.
Simple extraction and loading
At FKU, it is up to us that EasyCert is not or becomes a hidden "Supplier binding". We are aware that lifting equipment is also supplied by our competitors, which is why we help upload equipment purchased from other companies - and also provide the opportunity for the individual user to upload individual certificates on the purchased equipment.
Download our EasyCert app
- all your certificates for your lifting equipment at your fingertips - completely free of charge
With our EasyCert app from Fyns Kran Udstyr A/S on your mobile device, you can easily and quickly get a full overview of your statutory inspections and access the certificates on all your lifting equipment.
You simply log in with your login, and then via the ID numbers on the inspected lifting equipment, or via the attached QR code, you can see all information about the specific lifting equipment and download the statutory certificate.
You can also edit the fields Department, Location and write comments on the individual equipment. In addition, documents and images can also be uploaded to the individual equipment.
Download the EasyCert app for Apple on the App Store.
Download the EasyCert app for Android on the Google Play Store.
See a tour of EasyCert
My upcoming inspections
You will always be able to document that you have booked your inspection with us and continuously follow the status of these yourself.
Order an service technician
You can order your service technician online for an "urgent call-out" or general service inspection, directly via EasyCert.
See what the product status of the lifting equipment means
All equipment registered in EasyCert has a product status - see what it means here.
Search for a specific piece of lifting equipment
Do you need a certificate for a specific piece of equipment or see all the information - see the easiest way to find the lifting equipment.
Sort your lifting equipment and get an overview
EasyCert offers many options for sorting your lifting equipment - see the options here.
Get active location management with EasyCert
EasyCert offers many options for sorting your lifting equipment - see the options here.
Easily export all your data
See the option to export all your data in EasyCert.
Create an Inspection Report Certificate
Do you want a combined certificate for all inspections? See how to do it here.
Download all certificates – at once
See how to download all certificates in EasyCert - simple right?
How to change your password
Do you want to change your password to EasyCert. See how to do it easily here.
NCC Civil Egineering keeps track of certificates, lifting equipment and costs with EasyCert from Fyns Kran Udstyr
Civil Engineering is a department in NCC which is involved in many different projects, and this requires control of the lifting equipment for the individual jobs.
NCC Civil Engineering primarily deals with infrastructure and complex concrete constructions, and daily life is therefore spent solving tasks within climate protection, water and drainage, cable renovations, cable rerouting and tunnelling. The jobs are many and the complexity is often high.
New unique overview
Overview of lifting gear and related equipment was previously a major challenge for the department, Civil Engineering. The problem that was often experienced was that one department of NCC Civil Engineering could have a certain type of lifting equipment that another department needed to use during a job. But since no one had the opportunity to get an overview of the equipment and thus be able to move it internally between the departments, it often became the more expensive solution to rent or buy new equipment, while the equipment you already had the equipment laying around gathering dust. And this was an overly expensive and resource-intensive model. The Civil Engineering department was therefore looking for a system that, in addition to being able to provide easy access to the statutory documentation, could also provide a precise overview of which lifting equipment is available in the individual departments. The solution was EasyCert from Fyns Kran Udstyr, which is an online-based system that easily creates an overview of registered equipment and at the same time has all documentation and data gathered in one place.
Now NCC Civil Engineering has a full overview of their equipment, and in addition to resource optimization, NCC Civil Engineering has also experienced another significant difference – they now have online access to the statutory inspection certificates. Previously, a printed version in paper form had to accompany the individual equipment - with EasyCert, NCC Civil Engineering can find it immediately both on the web and on mobile devices via the EasyCert app.
EasyCert also holds up in the real world
"The system fully meets our expectations, it saves us unnecessary costs and we can find our certificate via the EasyCert app without any problems at the various workplaces - regardless of where it is in the world", says Kristian Andersen from NCC Civil Engineering.
BMS A/S: Best Practice on documentation
That we ourselves think that our EasyCert is smart is one thing, but having it confirmed by our customers is much more valuable.
We have just visited one of our customers, the BMS group, who use EasyCert in their daily lives, and who tell us why certificates and availability are so important in terms of safety and documentation.
BMS – an old Danish player on the international scene
Safety and documentation are a completely natural part of everyday life for the BMS group, who on a daily basis need to be able to document both data and certificates for inspection of lifting equipment in relation to their work within mobile cranes and lifts. They have been in the industry for a long time and know the importance of safety and documentation.
BMS's journey starts way back in 1953 in Copenhagen, as a state-owned company (Byggeriets Maskin Stationer A/S) and since then the company has grown - both through organic growth but also through a series of acquisitions. The Engaard family, who today own BMS, took over 100% of the company in the late 2000s. The BMS Group has grown to be among the world's largest within mobile cranes and lifts, and today BMS is a multinational company with activities in e.g. Sweden, Norway, Germany, Poland, Great Britain, South Africa, USA and Australia
A focus on safety
As a crane company, BMS has a natural focus on safety and documentation, and at BMS they have taken the concept of 'safety' to new heights. The company is certified according to the ISO45001 standard with the aim of ensuring a heightened focus on safety in order to meet requirements and regulations on safety within the industry.
In this connection, BMS has undertaken a large number of other initiatives that focus on safety, and a good example is a specially designed e-learning platform, which is used both by BMS employees and also by the company's customers. See more of the company's HSEQ initiatives at BMS.dk.
Strong collaboration
Fyns Kran Udstyr carries out statutory inspections of all BMS's lifting equipment throughout Denmark, and a large part of daily life at BMS is about safety and documentation, so the requirements for EasyCert are big. It is very important to BMS that documentation on the lifting equipment 'on board' the BMS cranes is approved and ready for use at any time because it is an important part of everyday life.
Per Holm Davids and Nicklas Lund both have extensive experience in working with BMS's jobs in the construction of data centres. Per says; "We depend on using EasyCert especially in connection with the large data center constructions. Here, the English standards must be followed, that is, the lifting equipment must be inspected at least every 6 months, where in Denmark it is normally every 12 months. Fortunately, EasyCert can easily work with this interval in relation to documentation and certificates”.
EasyCert is called 'Best Practice' by professionals
Previously, all documentation had to be delivered on paper to document inspection of the lifting gear on the cranes, and here EasyCert has a huge advantage, because the documentation does not have to be printed and everything is at hand if documentation is needed.
Per explains; “EasyCert has been accepted on many of the large data center construction sites by the people responsible for checking documentation and safety for inspection of lifting equipment. The control unit can easily gain access to scan the equipment itself, or look it up with the EasyCert App - the solution has even been called 'Best Practice'," says a smiling Per.
Do you have questions about EasyCert?
Get a call
